Loading ...
Loading ...
Loading ...
If the windshield wiper operation is inter-
rupted by snow or ice, the wiper may stop
moving to protect its motor. If this occurs,
turn the wiper switch to the OFF position
and remove the snow or ice that is on and
around the wiper arms. In approximately 1
minute, turn the switch on again to operate
the wiper.
The windshield wiper and washer operates when
the power switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
䊊
1
Intermittent — intermittent operation can be
adjusted by turning the knob toward
䊊
A
(Slower) or
䊊
B
(Faster).
䊊
2
Low — continuous low speed operation
䊊
3
High — continuous high speed operation
䊊
4
MIST — one sweep operation of the wiper
WASHER OPERATION
To operate the washer, pull the lever toward the
back of the vehicle
䊊
5
until the desired amount of
washer fluid is spread on the windshield. The
wiper will automatically operate several times.
Instruments and controls 2-39
Loading ...
Loading ...
Loading ...