Loading ...
Loading ...
Loading ...
English
154
Changing Setting of Demonstration
This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is “Auto”, which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting
to “Off”.
1Press the MENU button.
2Choose “Initial Setup”,
“Demo Mode”, and
then press the A
button.
3Press the f or e
button to choose the
desired option, and then press the A
button.
Press the MENU button again: The menu
screen will disappear.
To stop the demonstration midway, press the
C button.
The demo mode will end when the DVD
video camera/recorder is turned off or the
DISC EJECT button is pressed down.
Note:
• You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen
will appear.
• If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “O” or
“N”, or a card is loaded with the power switch set to
“P”.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC (for
DZ-GX20A or DZ-MV780A only).
• While the demonstration is being given, the recording
indicator will blink.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
RAM
Off
Start
ENTER RETURN
Demo Mode
Reset
Record LED
Power Save
Beep
Language
Auto
Ini tial Setup
Loading ...
Loading ...
Loading ...