User Manual - Page 277

For 2019 BMW X6.

Loading ...
Loading ...
Loading ...
LED front fog lights
These front fog lights are made using LED tech‐
nology. In the case of a malfunction, contact a
dealer’s service center or another qualified serv‐
ice center or repair shop.
Tail lights, bulb replacement
LED tail lights
These tail lights are made using LED technology.
In the case of a malfunction, contact a dealer’s
service center or another qualified service center
or repair shop.
Vehicle battery
Maintenance
The battery is maintenance-free.
More information about the battery can be re‐
quested from a dealer’s service center or another
qualified service center or repair shop.
Replacing the vehicle battery
General information
The manufacturer of your vehicle recommends
that you have a dealer’s service center or another
qualified service center or repair shop register
the vehicle battery to the vehicle after the battery
has been replaced. Once the battery has been
registered again, all comfort features will be avail‐
able without restriction and any Check Control
messages displayed which relate to comfort fea‐
tures will disappear.
Safety information
WARNING
Vehicle batteries that are not compatible can
damage vehicle systems and impair vehicle
functions. There is a risk of personal and prop‐
erty damage. Only vehicle batteries that are
compatible with your vehicle type should be in‐
stalled in your vehicle. Information on compati‐
ble vehicle batteries is available at your dealer’s
service center.
Charging the battery
General information
Make sure that the battery is always sufficiently
charged to guarantee that the battery remains
usable for its full service life.
A discharged battery is indicated by a red
indicator light.
The battery may need to be charged in the fol‐
lowing cases:
When making frequent short-distance drives.
If the vehicle is not used for more than a
month.
Safety information
NOTICE
Battery chargers for the vehicle battery can
work with high voltages and currents, which
means that the 12 volt on-board network can
be overloaded or damaged. There is a risk of
damage to property. Only connect battery
chargers for the vehicle battery to the starting
aid terminals in the engine compartment.
Starting aid terminals
In the vehicle, only charge the battery via the
starting aid terminals, refer to page 281, in the
engine compartment with the engine off.
Power failure
After a power loss, some equipment needs to be
newly initialized or individual settings updated, for
example:
Seite 277
Replacing components
MOBILITY
277
Online Edition for Part no. 01402896102 - X/18
Loading ...
Loading ...
Loading ...