User Manual - Page 177

For 2019 BMW X6.

Loading ...
Loading ...
Loading ...
Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road
is clear.
Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx.
1 mph/1 km/h.
Each time the rocker switch is pressed past
the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the
action.
Adjusting distance
Safety information
WARNING
The system cannot serve as a substitute for the
driver’s personal judgment. Due to the system
limits, braking can be late. There is a risk of ac‐
cidents or risk of damage to property. Be aware
to the traffic situation at all times. Adjust the
distance to the traffic and weather conditions
and maintain the prescribed safety distance,
possibly by braking.
Reduce distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected distance,
refer to page 178.
Increase distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected distance,
refer to page 178.
Continuing cruise control
General information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:
When the system is switched off.
When the ignition is switched off.
Calling up stored speed and
distance
Press button with the system switched
on.
Displays in the instrument
cluster
Desired speed and stored speed
Marking lights up green: sys‐
tem is active, the marking indi‐
cates the desired speed.
Seite 177
Driving comfort
CONTROLS
177
Online Edition for Part no. 01402896102 - X/18
Loading ...
Loading ...
Loading ...