User Manual - Page 185

For 2019 BMW X6.

Loading ...
Loading ...
Loading ...
With front PDC: switching on/off
manually
Press park assistance button.
On: the LED lights up.
Off: the LED goes out.
The rearview camera image is displayed if the re‐
verse gear is engaged when pressing the park
assistance button.
WARNING
Signal tones
An intermittent tone indicates when the vehicle
is approaching an object. E.g., if an object is de‐
tected to the left rear of the vehicle, a signal tone
sounds from the left rear speaker.
The shorter the distance to the object, the
shorter the intervals.
If the distance to a detected object is less than
approx. 10 inches/25 cm, a continuous tone is
sounded.
With front PDC: if objects are simultaneously lo‐
cated both in front of and behind the vehicle, an
alternating continuous signal is sounded.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with
Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to the
entertainment volume can be adjusted.
Via iDrive:
1.
"Multimedia", "Radio" or "Settings"
2. "Tone"
3. "Volume settings"
4. "PDC"
5. Turn the Controller until the desired setting is
selected.
6. Press the Controller.
Settings are stored for the profile currently used.
Visual warning
The approach of the vehicle to an object can be
shown on the Control Display. Objects that are
farther away are already displayed on the Control
Display before a signal sounds.
A display appears as soon as Park Distance Con‐
trol (PDC) is activated.
The range of the sensors is represented in the
colors green, yellow and red.
When the image of the rearview camera is dis‐
played, the switch can be made to PDC:
"Rear view camera"
System limits
Safety information
WARNING
The system can react not at all, too late, incor‐
rectly, or without justification due to the system
limits. There is a risk of accidents or risk of
damage to property. Follow the information re‐
garding the system limits and actively intervene
if needed.
Limits of ultrasonic measurement
Ultrasonic measurements might not function in
the following situations:
For small children and animals.
For persons with certain clothing, for instance
coats.
With external interference of the ultrasound,
for instance from passing vehicles or loud
machines.
When sensors are dirty, iced over, damaged
or out of position.
Under certain weather conditions such as
high relative humidity, wet conditions, snow‐
fall, extreme heat, or strong wind.
With tow bars and trailer couplings of other
vehicles.
Seite 185
Driving comfort
CONTROLS
185
Online Edition for Part no. 01402896102 - X/18
Loading ...
Loading ...
Loading ...