Loading ...
Loading ...
Loading ...
▷ After the ignition has been switched off while
selector lever position N is engaged.
Engaging selector lever
positions
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the engine is running and the brake
pedal is depressed is it possible to change from
selector lever position P to another selector lever
position.
The selection lever position P cannot be
changed until all technical requirements are met.
Engaging selector lever position D,
N, R
A selector lever lock prevents the following faulty
operation:
▷ Unintentional shifting into selector lever posi‐
tion R.
▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. Fasten driver's safety belt.
2. Press and hold the button to release the se‐
lector lever lock.
3. Push the selector lever in the desired direc‐
tion, past a resistance point, if needed. The
selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll without
its own power for a short distance, for instance in
a vehicle wash, or be pushed.
Engaging selector lever position N
1.
Start the engine while pressing on the brake
pedal.
2. If necessary, release the parking brake.
3. If necessary, deactivate Automatic Hold, refer
to page 95.
4. Depress the brake pedal.
5. Touch the selector lever lock and engage se‐
lector lever position N.
6. Switch the engine off.
Seite 103
Driving
CONTROLS
103
Online Edition for Part no. 01402896102 - X/18
Loading ...
Loading ...
Loading ...