Loading ...
Loading ...
Loading ...
35
6
Copier trouble?
MISFEED REMOVAL
3
Straighten the edges of the stack of paper and then reinsert it into the paper tray.
4
Push the paper release lever back again to secure the paper.
B. Misfeed in the copier
1
Place some scrap paper on a nearby level surface.
2
Push gently on both sides of the front cover to open the cover.
3
Gently pull the TD cartridge out and place it on the scrap paper which was prepared
in step 1. To remove the TD cartridge, see page 28, step 3.
4
Take a piece of scrap paper that is larger than the drum cartridge and fold it in half.
Keep this paper ready to shield the light-sensitive part of the drum cartridge from light
after it is removed from the copier.
●
The paper to be used for placing the TD cartridge and drum cartridge may
become soiled due to toner, etc.
●
The paper for placing the drum cartridge must be large enough to cover the
surface of the cartridge (green portion) when folded in half.
5
Gently pull the drum cartridge out and wrap the removed drum cartridge in the paper
which was prepared in step 4 so that the green drum section is shielded from light.
Place the drum cartridge down on a level surface. To remove the drum cartridge, see
page 29, DRUM CARTRIDGE REPLACEMENT.
Loading ...
Loading ...
Loading ...