Loading ...
Loading ...
Loading ...
34
6
Copier trouble?
COPIER TROUBLE?
This chapter describes misfeed removal and troubleshooting.
MISFEED REMOVAL
When the misfeed ( ) indicator blinks or blinks in the display, the copier will stop because
of a misfeed. First check the misfeed location. Remove the misfed paper following the
instructions for each location shown in the illustration below.
If blinks in the display, proceed to “A. Misfeed in the paper tray”. (p. 34)
If the paper is misfed here, proceed to
“A. Misfeed in the paper tray”. (p. 34)
If the misfed paper is seen from this side,
proceed to “C. Misfeed in the exit area”.
(p. 36)
If paper is misfed here, proceed to
“B. Misfeed in the copier”. (p. 35)
A. Misfeed in the paper tray
1
Pull the paper release lever at the right of the paper tray toward you.
Paper release lever
2
Remove all the paper, including the jammed paper, from the paper tray.
If the misfed paper will not come out easily, do not pull it hard, as you may tear
it or damage the printing mechanism. In such cases, proceed to “B. Misfeed
in the copier” on page 35.
6
Loading ...
Loading ...
Loading ...