Loading ...
Loading ...
Loading ...
32
5
Supplies and user maintenance
USER MAINTENANCE
Original table and original cover
Dirt or stains on the glass or cover will also be copied. Wipe the glass and the cover with a soft,
clean cloth. If necessary, dampen the cloth with water or a glass cleaner.
Original table Original cover
Cleaning the drum cartridge
If some parts of the images are missing from the printed page, you may need to clean the
surface of the drum in the drum cartridge. Because the drum surface is very sensitive, you
must take extreme care when cleaning it, otherwise it may become damaged, and any damage
to this component will have a serious effect on the print quality.
Follow the procedure below to clean the drum surface.
1
Turn off the copier power.
2
Remove the TD cartridge. To remove the TD cartridge, see page 28, step 3.
3
Remove the drum cartridge. To remove the drum cartridge, see page 29, DRUM
CARTRIDGE REPLACEMENT.
Put the drum cartridge down on a clean, uncluttered and level surface. The
drum can easily become damaged if it is not handled with care.
4
Take a sheet of clean paper and roll it into a tube. Roll it tightly so that the diameter of
the hole at each end is less than the thickness of your little finger.
Loading ...
Loading ...
Loading ...