Loading ...
Loading ...
Loading ...
en Operating the appliance
38
AutoPowerOff (Switching off
automatically after the end of
the programme)
Au t o Po wer Of f
To save energy, the dishwasher
is switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
■ off: The appliance does not switch
off automatically.
■ After one minute: The appliance
switches off after 1 minute.
■ After two hours: The appliance
switches off after 2 hours.
Note: Note that for the settings "After
one minute" and "After two hours", the
interior lighting 1" is switched off. To
activate the interior lighting, press the
ON/OFF switch (.
emotionLight (interior
lighting) *
Emot i onLi ght
* Depending on the features of your
dishwasher
EmotionLight 1" is the interior lighting
for your dishwasher. You can switch
the interior lighting on or off.
Notes
■ Depending on the setting of
AutoPowerOff, the interior lighting is
either switched on or off.
■ Note that the interior lighting is
automatically switched off after 1
hour when it is switched on and the
door is open.
Changing start programme
You can change the “Start programme”
setting.
Tone volume*
Tone vol ume
* depending on the configuration of
your specific dishwasher
The end of the programme is indicated
by a buzzer. You can also change this
setting.
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can control the volume of
the signal. If you do not like the button
volume, you can switch it off.
Greeting
When you switch on the dishwasher, the
brand logo appears. You can switch off
the brand logo.
Factory setting
You can reset all settings to the factory
setting.
Switching on the appliance
1. Turn tap fully on.
2. Switch on ON/OFF switch (.
The Eco 50° programme has been
preset for environmentally friendly
operation whenever the appliance
starts. This programme remains
selected if no other programme
button 0 is pressed.
3. Press START button )".
Programme sequence starts.
Loading ...
Loading ...
Loading ...