Loading ...
Loading ...
Loading ...
Rinse aid en
23
Using detergents with salt
component
Det er gent wi t h a sal t component
If combined detergents with a salt
component are used, special salt can
usually be omitted up to a water
hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l). If the water
hardness is over 21° dH, salt must be
used.
Switching off salt refill
indicator/water softening
system
Swi t c h i n g of f wa t e r sof t eni ng
If the use of combined detergents with
a salt component interferes with the salt
refill indicator @ in the control panel
or the text on the front display )B
(enough salt for x rinse cycles), the
displays can be switched off.
Proceed as described under “Adjusting
the water softening system” and set the
value to 0-8. The water softening system
and salt refill indicator are now switched
off.
, Rinse aid
Ri n s e ai d
As soon as the low rinse-aid indicator
8 is lit on the control panel or is
requested on the front display * )B,
rinse-aid should be topped up.
The rinse aid is required for stain-free
utensils and clear glasses. Use only
rinse aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH, 26°
Clarke, 3.7 mmol/l) only. If the water
hardness is over 21° dH, rinse-aid must
be used.
* depending on the features of your
dishwasher
Top up the rinse-aid as follows:
1. Open dispenser 92; press lug on
the lid (1) and lift (2).
2. Add rinse-aid up to the max. mark.
3. Close the lid.
Lid “clicks” into position.
4. Remove overflowed rinse aid with a
cloth.
This prevents excessive frothing
during the next rinse cycle.
2
1
PD[
Loading ...
Loading ...
Loading ...