Loading ...
Loading ...
Loading ...
en Home Connect
20
This is how to set up the energy
manager „:
1. Switch on ON/OFF switch (.
2. Press and hold the Info button {
h for 3 seconds until the following
text appears on the front display
)B:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
3. Press the > )2 button repeatedly
until “Energy manager” appears on
the front display )B.
4. Make the setting with the setting
button + P.
5. Connect your dishwasher to the
energy manager of the home system
within the following 2 minutes. Also
activate the connection to the energy
manager of your home system (refer
to the instructions for use from the
energy manager manufacturer).
Following successful connection of the
dishwasher to the energy manager of
your home system, the following
message is indicated on the front
display )B. If login of the energy
manager is unsuccessful, please repeat
Step 5.
Note: The “Energy manager” menu
option is not available unless there is a
connection to the home network and
the appliance is connected to the app.
Further information and system
requirements for using the energy
manager can be found at
www.home-connect.com/energymana
gement
* depending on the features of your
dishwasher
Activating energy
manager „ *
Ac t i v a t i n g ener gy manager
To start the energy manager „ , you
must activate the remote start button }
` and select time preselection X.
Once you have activated the remote
start button } `, you can use the
Home Connect App to perform time
preselection X.
You can also activate the energy
manager „ manually using the buttons
on the dishwasher.
This is how to activate the energy
manager „ on the dishwasher:
1. Switch on ON/OFF switch (.
2. Select programme 0.
3. Press time preselection button X.
4. Keep pressing the setting buttons + -
P until the displayed time
corresponds with your requirements.
5. Press START button )". Time
preselection is activated.
6. Activate the remote start button }
`.
7. After successful activation, the
energy manager „ will have access
to the dishwasher and can start it
during the set time span.
Note: Where the energy manager „
starts the programme earlier, the time
display “Finish in”/“Finish at” will be
updated.
* depending on the features of your
dishwasher
Loading ...
Loading ...
Loading ...