Loading ...
Loading ...
Loading ...
Water softening system/special salt en
21
Deactivating energy
manager „ *
De a c t i v a t i n g ener gy manager
The menu option “Disconnect with +” is
available when the dishwasher is
connected with the energy manager of
the home system.
This is how to deactivate the energy
manager:
1. Switch on ON/OFF switch (.
2. Press and hold the Info button {
h for 3 seconds until the following
text appears on the front display
)B:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
3. Press the > )2 button repeatedly
until the required setting appears on
the front display )B.
4. Make the setting with setting buttons
+ - P.
5. Press Info button { h for 3
seconds.
Energy manager is deactivated.
* depending on the features of your
dishwasher
Declaration of Conformity y
De c l a r a t i o n of Co n f o r mity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance
which features Home Connect is in
accordance with the basic requirements
and the other relevant provisions of the
directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.bosch-home.com/de on the
product page for appliance in the
additional documents.
+ Water softening
system / special salt
Wat er sof t eni ng syst em/speci al sal t
To ensure good rinsing results, the
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l) must
be softened. The water is softened with
special salt (regeneration salt) in the
water softening system
of the dishwasher. The setting and
therefore the required amount of salt
depends on the degree of hardness of
your tap water (see following water
hardness table).
Water hardness table
:L)LLVDUHJLVWHUHGWUDGHPDUN
RI:L)L$OOLDQFH
:DWHU
KDUGQHVV
YDOXH(
VRIW
PHGLXP
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PPROO
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
+DUGQHVV
UDQJH
KDUG
KDUG
PHGLXP
PHGLXP
VRIW
Loading ...
Loading ...
Loading ...