Loading ...
Loading ...
Loading ...
9
Functions
BEFORE FIRST USE
• Remove any packaging material and
promotional labels. Remove the blending
shaft from the motor body and wash it in
warm soapy water (follow the instructions “To
detach the blending shaft”). Rinse and dry
thoroughly. Ensure no water remains inside
the blending shaft to avoid water running
into the motor body when reattached.
• Disassemble and wash the chopping blade,
chopping bowl, chopping bowl lid, whisk,
storage lid and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains in the chopping bowl lid or
whisk attachment to avoid water running into
the motor body when reattached.
NOTE
The detachable blending shaft, chopping bowl,
chopping blade, blending jug, whisk and dual
purpose storage lid/anti-slip mat can also be
washed in the dishwasher. The chopping bowl
lid, whisk gearbox and motor body are not
dishwasher safe – see the care and cleaning
section of this booklet for cleaning instructions
of these parts.
This stick blender is a versatile appliance that
can be attached to:
• The stainless steel blending shaft– for use as
an immersion blender.
• The chopping bowl with chopping blade and
lid – for use as a mini chopper.
• The whisk attachment – for use as a hand
whisk.
IMMERSION BLENDER
To attach the blending shaft
Hold the blending shaft with the blades down,
and align the top end of the blending shaft with
the corresponding end of the motor body and
push until the blending shaft ‘clicks’ and locks
onto the motor body.
Always ensure blending shaft is dry with no
water left inside before reattaching.
To use as an immersion blender
Ensure the blending shaft is assembled to the
motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should only be ½ full or less when
blending liquids or when making a puree of
fruit and/or vegetables.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at the
top of motor body, select a speed between
1 and 15.
Low Speed : 1
High Speed : 15
NOTE
If selecting a high speed, it is recommended
that you start with a slow speed and gradually
increase to the higher speed to avoid
splattering and over-processing.
BSB510XL_IB_B16.indd 9 7/11/2016 1:33 PM
Loading ...
Loading ...
Loading ...