Loading ...
Loading ...
Loading ...
10
4. Place the blending shaft as deeply as
possible into the blending jug and press the
trigger switch to turn the stick blender on.
The button must be held for the required
duration of operation.
5. Work through the ingredients in
the blending jug with a gentle raising and
lowering motion.
6. When processing has finished switch off
the motor by releasing the trigger switch
and remove the power plug from the power
outlet.
7. Ensure the blade has completely stopped
before lifting the stick blender out of the
blending jug.
To detach the blending shaft
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
blending shaft to detach.
Recommendations when using as an
immersion blender
• The stick blender mixes foods and liquids
rapidly, therefore it is easy to over-process.
Remember to periodically release the trigger
switch and check food throughout operation.
• Allow food to cool slightly (so not boiling)
before blending.
• The blending shaft allows for hot food to
be processed directly in the saucepan. This
makes blending soups and sauces very easy.
For safety reasons, remove the saucepan from
the heat source before processing.
• Ensure the motor body of the appliance and
power cord are kept away from any
heat source.
• When puréeing and blending, cut food into
uniform sizes. This will ensure smooth and
consistent results.
• Warm all liquids to be added to
soups and purées, this will ensure
even blending.
• Place the blending jug on the anti-slip mat
during blending. This will keep the blending
jug stable.
• Do not operate the stick blender continuously
for more than 1 minute. Allow the motor to
rest for 1 minute between each use.
• DO NOT place stick blender in chopping
bowl to process ingredients.
If food becomes lodged around the blending
blade or in the blade guard, follow these safety
instructions:
1. Release the trigger switch and unplug the
power plug from the power outlet.
2. Use a spatula to carefully dislodge the food.
Do not use fingers as the blending blade is
sharp.
3. After the food has been removed and blades
are clear, plug the appliance back into the
power outlet and continue blending.
BSB510XL_IB_B16.indd 10 7/11/2016 1:33 PM
Loading ...
Loading ...
Loading ...