Loading ...
Loading ...
Loading ...
9
COOKTOP CONTROLS - KNOB CONTROLS
Cooktop Controls
The controls can be set to anywhere between HI and LO.
To Use:
1. Push in and turn knob to desired heat setting.
Use the following chart as a guide when setting heat levels.
NOTE: Elements will not glow red on all settings.
Hot Surface Indicator Lights (on Standard Control models)
The Hot Surface Indicator Lights will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.
If the cooktop is on when a power failure occurs, the Hot Surface
Indicator Lights will remain on after the power is restored to the
cooktop. They will remain on until the cooktop has cooled
completely.
Power Light
Each cooktop has a Power On light. The light will glow when any
burner is on.
Dual/Triple Element
The dual- and triple-size elements offer flexibility depending on
the size of the cookware. Single size can be used in the same
way as a regular element. The dual size combines the single and
outer element and is recommended for larger cookware, large
quantities of food, and home canning.
For best High heat performance, match burner to cookware size.
For best Low heat or Simmer performance, match cookware to
largest cooking area ring and use single ring for desired
performance.
Triple Element (on some models)
Dual Element
SETTING RECOMMENDED USE
Hi
■ Start food cooking.
■ Bring liquid to a boil.
Medium High
■ Hold a rapid boil.
■ Quickly brown or sear food.
Med (Medium)
■ Maintain a slow boil.
■ Fry or sauté foods.
■ Cook soups, sauces and
gravies.
■ High simmer or simmer
without lids.
Medium Low
■ Stew or steam food.
■ Simmer.
Lo
■ Low simmer using lids.
Dual/Triple Elements
■ Home canning.
■ Large-diameter cookware.
■ Large quantities of food.
Melt (on some elements)
■ Melt chocolate or butter.
Simmer
(on some elements)
■ Simmer sauces
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
REMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
A. Single size
B. Dual size
C. Triple size
A. Single element
B. Dual element
Hot Surface
A
B
C
A
B
Loading ...
Loading ...
Loading ...