Loading ...
Loading ...
Loading ...
HomeConnect en
23
Setting Description and options
Set using the
assistant
The hob can be set up to automatic-
ally log into your home network, or
you can do this manually.
¡ Use the assistant to configure the
settings (automatic connection to
the home network).
1
¡ Use the assistant to configure the
settings: WPS not supported
(manually log into your home net-
work).
Connect to
app
You can connect the hob to one or
more HomeConnect accounts.
Set using the
app
¡ Off: Only the hob's current status
is displayed in the app.
¡ On
1
: You can send cooking set-
tings from the app to the hob. The
cooking settings that are sent
must be confirmed on the hob.
Wi-Fi You can switch off the hob's wireless
module to disconnect it from the Wi-
Fi.
¡ Deactivated: The wireless module
is switched off.
¡ Activated
1
: Wireless module con-
nected.
Disconnecting
from the net-
work
You can delete the saved connec-
tions to the Wi-Fi.
The network connection is also de-
leted if you restore the factory set-
tings on your hob.
Appliance info You can display information about
HomeConnect and the network.
1
Factory setting
24.4 Wi-Fi symbol
The Wi-Fi indicator on the main screen changes ac-
cording to the status and quality of the connection and
the availability of the HomeConnect server.
If you press and hold the symbol for at least two
seconds, the display shows a description of the sym-
bol.
24.5 Changing settings via the
HomeConnect app
You can use the HomeConnect app to change the set-
tings for the cooking zones and send them to the hob.
Requirements
¡ The hob is connected to the Wi-Fi and to the
HomeConnect app.
¡ In order to set the hob via the HomeConnectapp,
the basic setting "Setting via the app" must be
switched on. The basic setting is switched on on de-
livery. If the option for the transmission of settings
has been deactivated, only the hob's operating
statuses will be displayed in the HomeConnect app.
1.
Select the setting in the HomeConnect app and
send it to the hob.
Follow the instructions in the HomeConnect app.
Settings that you send from the HomeConnect app
to the hob must be confirmed on the hob.
a If cooking settings are transmitted to a cooking
zone, the display shows a message.
2.
To confirm a setting, touch "Apply".
3.
To discard the setting, touch "Discard".
24.6 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered HomeCon-
nectuser, have installed the app on your mobile device
and be connected to the HomeConnectserver.
As soon as a software update is available, you will be
informed via the HomeConnectapp and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the HomeConnectapp if you are in your
home network (Wi-Fi). The HomeConnectapp informs
you once installation is successful.
Notes
¡ The software update consists of two steps.
– The first step is the download.
– The second step is the installation on your appli-
ance.
¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡ Installation takes a few minutes. You cannot use
your appliance during installation.
¡ We recommend that you install security updates as
soon as possible.
24.7 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the HomeConnect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com.
24.8 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
HomeConnect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the in-
stalled Wi-Fi communication module).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous resetting to factory settings.
This initial registration prepares the HomeConnect
functions for use and is only required when you want to
use the HomeConnect functions for the first time.
Loading ...
Loading ...
Loading ...