Loading ...
Loading ...
Loading ...
Individual safety switch-off en
21
Individual safety switch-off
21 Individual safety switch-off
The safety function is switched on if one cooking zone
is in operation for an extended period and you do not
change any settings. A message appears on the dis-
play and the cooking zone stops heating.
To switch off the display and reset the cooking zone,
touch any button.
Basic settings
22 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
22.1 Overview of the basic settings
Setting Description and options
Language Change the display language for the
appliance.
Home Connect You can use this function to connect
the appliance to your home network
and a mobile device.
cookConnect
System
You can use this function to control
certain functions of the extractor
hood via the hob.
Signal tones You can use this function to select
warning tones that the appliance is
to output.
Duration of the
warning signal
You can use this function to change
the duration of the warning signal.
Button tones You can use this function to select
whether the appliance emits tones
when you touch the buttons on the
touch display.
Display bright-
ness
Change the brightness of the display.
flexInduction You can use this function to set the
switch-on mode for the function after
the hob has been switched on: Two
independent cooking zones or one
single zone.
powerMove
Plus
You can use this function to change
the preset power levels of the three
cooking areas of the FlexZone.
Childproof
lock
You can use this function to automat-
ically lock the hob to prevent chil-
dren from using the appliance
without supervision.
quickStop
function
Allows the cooking zone to be
switched off quickly and directly via
the main display.
Brand logo You can use this function to set
whether the brand logo is to be dis-
played when you switch on the hob.
Setting Description and options
reStart You can use this function to set how
long the appliance saves the most
recently used settings when you
switch off the appliance.
Power limita-
tion
This enables you to limit the total
power of the hob, if required, due to
the circumstances of your electrical
installation. The available settings de-
pend on the maximum power of the
hob. You can find precise informa-
tion on the rating plate. If the function
is switched on and the hob has
reached the set power limit, is dis-
played and you cannot select a
higher power level.
Energy con-
sumption dis-
play
Shows the total energy consumption
in kWh between switching the cook-
ing zone on and off.
The accuracy of the display depends
on various factors such as the
voltage quality of the power supply.
Cooking
sensor
Add a new wireless cooking sensor.
Setting the
boiling point
You can enter your height above sea
level to improve the cooking sensor's
accuracy.
Cookware test You can use this function to test the
quality of the cookware.
Appliance in-
formation
You can use this function to call up
information about the appliance.
Factory set-
tings
Reset all settings to the factory set-
tings.
22.2 Calling up basic settings
Requirement:All cooking zones must be switched off.
1.
Open the docking menu.
2.
Touch .
3.
Drag your finger to scroll through the available set-
tings.
4.
To call up the submenu and select the required op-
tion, touch a setting.
To return to the previous menu, touch within a
submenu.
5.
Before you exit the basic settings, save or cancel
the settings in the confirmation screen.
6.
Touch to exit.
Loading ...
Loading ...
Loading ...