Loading ...
Loading ...
Loading ...
global.BISSELL.com
8
2
4
1
3
Before each use, hold the Solution Spray
Trigger for 10 seconds to prime the
system with cleaning solution. LED lights
illuminate when holding the trigger.
NOTE: When solution is flowing, you will
see bubbles forming at the edges of the
Brush Roll Window.
ATTENTION Do not over wet carpet. Be careful not to run over loose objects or edges
of area rugs. Stalling the brush may result in premature belt failure.
HARD FLOOR CLEANING TIPS:
• When cleaning excessively dirty or muddy hard floors, or if your Brush Roll
looks dirty, use the 3-in-1 Docking Station to rinse your Brush Roll before cleaning
your area rugs.
• For overly challenging and stuck-on messes on your hard floors, activate the RUG
mode and hold your CrossWave® Cordless over the mess. Using short passes while
holding the trigger allows the multi-surface brush to go to work.
RUG CLEANING TIPS:
• Before cleaning area rugs, test an inconspicuous area of the rug for colorfastness.
Also, please check manufacturer’s tag before cleaning area rugs for any specialized
cleaning instructions. Not for use on silk or delicate area rugs.
• The RUG button dispenses twice the solution of the HARD FLOOR button to help
with area rug cleaning.
To clean, hold the Solution Spray Trigger
to apply solution on both forward and
backward passes.
To dry hard floors faster, release the
trigger and clean a second pass without
dispensing solution.
To start cleaning your floors, turn the
machine ON by pressing the HARD
FLOOR or RUG button. Once the setting
is selected, the dry vacuum will turn on.
To turn OFF, press the setting button a
second time.
Recline the body of the machine
backward to start the Brush Roll
spinning. To stop the Brush Roll
spinning, you will need to stand the
machine upright.
Cleaning Your Floors
Loading ...
Loading ...
Loading ...