Loading ...
Loading ...
Loading ...
Installation
85
EN
Carefully screw hose connector 3 to the
appliance’s gas connector 1 (½”
ISO 228-1 thread), placing seal 2
between them. Hose connector 4 can also
be screwed to hose connector 3,
depending on the diameter of the gas hose
used. After tightening the hose connector(s),
push gas hose 6 onto the hose connector
and secure it with clamp 5 (which must be
compliant with the applicable standard).
Connection to LPG
Use a pressure regulator and make the
connection on the gas cylinder following
the guidelines set out in the standards in
force.
The supply pressure must comply with the
values indicated in the table “Gas types
and Countries”.
Connection with a steel hose
Make the connection to the gas mains
using a continuous wall steel hose whose
specifications comply with the applicable
standard.
Carefully screw the connector 3 to the gas
connector 1 of the appliance, placing the
seal 2 between them.
Connection using a rubber hose
complying with current standards is
only permitted if the hose can be
inspected along its entire length.
The inside diameter of the hose
must be 8 mm for LPG and 13 mm
for Natural gas and Town gas.
Loading ...
Loading ...
Loading ...