Loading ...
Loading ...
Loading ...
– Maneuvering capability is limited going
around corners.
– The tow bar will generate lateral forces
if it is secured with an offset.
Tow rope
Observe the following notes when using the
tow rope:
– Use nylon ropes or straps, which will en-
able the vehicle to be towed without
jerking.
– Make sure the tow rope is not twisted
when fastening.
– Check the fastening of the tow fitting
and tow rope in regular intervals.
– Do not exceed a towing speed of
30 mph/50 km/h.
– Do not exceed a towing distance of
3 miles/5 km.
– When starting to tow the vehicle, make
sure that the tow rope is taut.
Tow fitting
General information
The screw-in tow fitting should always be
carried in the vehicle.
The tow fitting can be screwed in at the
front or rear of the vehicle.
The tow fitting and the onboard vehicle tool
kit, refer to page 250, are together in the
cargo area.
Use of the tow fitting:
– Use only the tow fitting provided with
the vehicle and screw it all the way in.
– Use the tow fitting for towing on paved
roads only.
– Avoid lateral loading of the tow fitting,
for instance do not lift the vehicle by the
tow fitting.
– Check the fastening of the tow fitting in
regular intervals.
Safety information
NOTICE
If the tow fitting is not used as intended,
there may be damage to the vehicle or to
the tow fitting. There is a risk of damage
to property. Follow the notes on using the
tow fitting.
Screw thread for tow fitting
Threaded holes for the tow fitting are lo-
cated in the front and rear of the vehicle on
the right side with respect to the direction
of travel.
Press on the mark on the edge of the cover
to push it out.
Seite 260
MOBILITY Breakdown assistance
260
Online Edition for Part no. 01405A02680 - II/20
Loading ...
Loading ...
Loading ...