Loading ...
Loading ...
Loading ...
Minimum tire inflation pressure is not
reached
1. Pull the connector out of the power
socket inside the vehicle.
2. Drive 33 ft/10 m forward and back to
distribute the sealant in the tire.
3. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
4. Insert the connector into the power
socket inside the vehicle.
5. With standby state or drive-ready state
switched on, switch on the compressor.
If a tire inflation pressure of at least
2 bar cannot be reached, contact your
dealer's service center or another quali-
fied service center or repair shop.
If a tire inflation pressure of at least
2 bar is reached, see Minimum tire infla-
tion pressure is reached.
6. Unscrew the connection hose of the
compressor from the tire valve.
7. Pull the connector out of the power
socket inside the vehicle.
8. Stow the Mobility System in the vehicle.
Minimum tire inflation pressure is
reached
1. Unscrew the connection hose of the
compressor from the tire valve.
2. Pull the connector out of the power
socket inside the vehicle.
3. Stow the Mobility System in the vehicle.
4. Immediately drive approx.
5 miles/10 km to ensure that the sealant
is evenly distributed in the tire.
Do not exceed a speed of
50 mph/80 km/h.
If possible, do not drive at speeds less
than 12 mph/20 km/h.
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
Seite 237
Wheels and tires MOBILITY
237
Online Edition for Part no. 01405A02680 - II/20
Loading ...
Loading ...
Loading ...