Loading ...
Loading ...
Loading ...
Safety information
Warning
Improper use of the power mains connec-
tion can lead to damage, for instance cable
fire. There is a risk of injury or risk of
damage to property. Use the charging ca-
ble only for charging the vehicle, and do
not extend it using cables or adapters.
Warning
If the charge current strength is adjusted
incorrectly, the power mains of the house-
hold socket can be overloaded and over-
heat. There is a risk of fire. Adjust the
charge current strength to the power
mains prior to charging on household
sockets. With unknown power networks,
set on the lowest level.
Starting the charging process
1. Engage selector lever position P. Set the
parking brake, if needed.
2. For planning the charging process, refer
to page 224.
3. Switch off drive-ready state.
4. Connect Level 1 charging cable to the
household socket or Level 2 charging
cable to the port on the charging station.
5. Open the charging socket flap.
6. Connect the charging cable to the vehi-
cle, refer to page 221.
7. Lock vehicle if it is unlocked.
Charging status display
Indicator light at the charging socket
An indicator light is located on the charging
socket.
Charging status
Light Charging status
White Charging cable can be con-
nected or removed.
Flashes or-
ange
Charging process is being
prepared.
Yellow Charging process paused.
Flashes yel-
low
Charging process is active.
Flashes red
rapidly
Fault in the charging proc-
ess.
Green Charging process is com-
pleted.
When the vehicle is locked, the indicator
light goes out after some time.
When the vehicle is unlocked, the yellow
indicator light flashes continuously. The
other indicator lights go out after some
time.
Press the button on the vehicle key to
check the charging state. The charging sta-
tus is indicated on the indicator light. In
some cases the vehicle is locked.
Seite 223
Charging the vehicle MOBILITY
223
Online Edition for Part no. 01405A02680 - II/20
Loading ...
Loading ...
Loading ...