Loading ...
Loading ...
Loading ...
Resetting average values
Press and hold the button on the turn signal
lever.
Distance to destination
Depending on the vehicle equipment, the
distance remaining to the destination is dis-
played if a destination is entered in the nav-
igation system before the trip is started.
The distance to the destination is adopted
automatically.
Time of arrival
Depending on the vehicle equipment, the
estimated time of arrival is displayed if a
destination is entered in the navigation sys-
tem before the trip is started.
The time must be correctly set.
Onboard Computer on the Control
Display
Concept
The Onboard Computer displays different
vehicle data on the Control Display, such as
average values.
General information
Two types of Onboard Computers are availa-
ble on the Control Display:
– "Onboard info": average values, such as
the consumption, are displayed. The val-
ues can be reset individually.
– "Trip computer": the values deliver an
overview of a specific route and can be
reset as often as necessary.
Calling up the Onboard Computer or
trip computer
Via the Central Information Display (CID):
1. "My MINI"
2. "Driving information"
3. "Onboard info" or "Trip computer"
Resetting the Onboard Computer
Via the Central Information Display (CID):
1. "My MINI"
2. "Driving information"
3. "Onboard info"
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via the Central Information Display (CID):
1. "My MINI"
2. "Driving information"
3. "Trip computer"
4. Move the Controller to the left, if
needed.
– "Reset": all values are reset.
– "Automatic reset": all values are
reset approx. 4 hours after the vehi-
cle has come to a standstill.
5. If necessary, "OK"
Speed warning
Concept
A speed limit can be set that when reached
will cause a warning to be issued.
Seite 130
CONTROLS Displays
130
Online Edition for Part no. 01405A02680 - II/20
Loading ...
Loading ...
Loading ...