Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 65
WINDOWS
Power Window Controls
The window controls on the driver's door control
all the door windows.
Power Window Switches
There are single window controls on each
passenger door trim panel, which operate the
passenger door windows. The window controls
will operate only when the ignition is in the ACC
or ON/RUN position.
NOTE:
For vehicles equipped with the Uconnect
system, the power window switches will remain
active for up to 10 minutes after the ignition is
placed in the OFF position. Opening either front
door will cancel this feature. The time is
programmable. Refer to “Uconnect Settings” in
“Multimedia” for further information.
Warm Weather
Turn
on and set the mode
control to the
position.
Cool Sunny
Operate in
position.
Cool & Humid
Conditions
Set the mode control
to and turn on
to keep windows
clear.
Cold Weather
Set the mode control
to the position. If
windshield fogging
starts to occur, move
the control to the
position.
WEATHER
CONTROL
SETTINGS
WARNING!
Never leave children unattended in a vehicle,
and do not let children play with power
windows. Do not leave the key fob in or near
the vehicle, or in a location accessible to
children, and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-Go in
the ACC or ON/RUN mode. Occupants,
particularly unattended children, can become
entrapped by the windows while operating
the power window switches. Such entrapment
may result in serious injury or death.
2
20_LD_OM_EN_USC_t.book Page 65
Loading ...
Loading ...
Loading ...