Loading ...
Loading ...
Loading ...
Navigation System
91
System Setup
Guidance Mode
Allows you to select the guidance
display mode: Single Screen
or
Split
Screen.
To get to Guidan
ce Mode from the
Setup screen, select in sequence,
“More,” “Routing & Guidance,” and
“Guidance Mode.”
The factory default is
Single Screen
.
NOTE:
The Guidance Mode can also be
selected on the Icon Selection screen.
See
Showing Icons on the Map
on
page 58.
Vehicle
From the
Setup screen (second), say or
select Vehicle
and the following screen
appears:
Off-road Tracking
With this
On, the system will provide
white off-road tracking dots
(“breadcrumbs”) on the
map
screen
whenever you drive into an area where
the map does not show any roads.
See Map Screen Legend
on page 19.
After you have traveled approximately
1/2 mile away from a mapped road, the
system will display a series of white
dots on the
map screen to show the path
you have traveled. This is provided so
you can follow the dots to backtrack to
the mapped road y
ou originally left.
Tracking continues until you reach a
mapped road. See
Off-road Tracking
on
page 60.
Tracking is shown only in the 1/20, 1/8,
1/4, and 1/2 mile scales, or the 80, 200,
400, and 800 meter scales. Use the
ZOOM buttons to change the scales if
necessary.
NOTE:
To clear existing dots, turn this feature
off and exit Setup. To re-enable this
feature, return to Setup and turn it on
again.
Loading ...
Loading ...
Loading ...