Loading ...
Loading ...
Loading ...
English 23
02 OPERATING
USING THE DISPENSER
Push the appropriate ice type
button to select what you want
dispensed.
NO ICE
Select this if you want
to turn ice maker off
Using the ice Dispenser
Place a glass underneath the
ice dispenser and push gently
against the dispenser lever with
your glass.
Make sure the glass is in line
with the dispenser to prevent
the ice from bouncing out.
• To select water, press the water button on the
display, and then press the dispenser lever.
• To select Ice, press the ICE type button of
your choice on the display, and then press the
dispenser lever.
• If you have selected cubed ice, when you
press the lever, the dispenser may dispense a
small amount of crushed ice first.
• If ice doesn’t come out, pull out the ice bucket
and press the test button located on the right
side of ice maker.
Maintaining the Ice Bucket
• To clean the ice bin/bucket, wash with a mild
detergent, rinse well, and dry thoroughly it. Do
not use harsh or abrasive cleaners or solvents.
• Ice is made in cubes. When you select
“Crushed”, the ice maker grinds the ice cubes
into crushed ice.
• When you select Cubed Ice after using the
Crushed Ice mode, a small amount of residual
crushed ice might be produced.
• The ice cubes generated by the rapid ice
making process will look white, which indicates
they were generated normally.
• As the ice maker in the refrigerator room
makes ice cubes even faster, move the ice
cubes from the refrigerator ice bin to the
freezer ice bin if you need more ice cubes.
• If ice doesn’t come out, pull out the ice bucket
and press the test button located on the right
side of ice maker. See the illustration below.
• Do not press the test button continuously
when the tray is filled with ice or water. Water
may overflow or ice may jam the bucket.
Making Ice
• To fill the ice bucket to maximum capacity after
installation, follow these steps:
1. Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2. Dispense 4 to 6 ice cubes into the glass.
3. After 8, and then 16 hours, dispense a full
glass of ice.
• To test the ice maker, press the Test button
on the ice maker. You will hear the refrigerator
chime (ding-dong). When the chime sounds,
release the Test button.
• The chime sounds automatically again to let
you know the ice maker is working well.
check
the water
level
Test button
RF30KMED_DA68-02894B-04_EN.indd 23 2018-07-04 8:25:28
Loading ...
Loading ...
Loading ...