Loading ...
Loading ...
Loading ...
English 17
01 SETTING UP
Completing the Set Up
Now that you have your new refrigerator installed
in place, you are ready to set up and enjoy the
features and functions of the appliance. By
completing the following steps, your refrigerator
should be fully operational.
1. Make sure your refrigerator is in an appropriate
location with reasonable clearance between it
and the wall. Refer to installation instructions in
this manual.
2. Once the refrigerator is plugged in, make sure
the interior light comes on when you open the
doors.
3. Set the Temperature control to the coldest
temperature and wait for an hour. The freezer
will get slightly chilled and the motor will run
smoothly. Reset the refrigerator and freezer to
the temperatures you want.
4. After you plug the refrigerator in, it will
take a few hours to reach the appropriate
temperature. You can store food and drinks
in the refrigerator after the temperature is
sufficiently cool.
If condensation or water drops appears
on both sides of fridge door’s central
part, turn the Energy Saver mode off after
removing the condensation. (See the
explanation on Energy Saver button in the
USING THE CONTROL PANEL.)
RF30KMED_DA68-02894B-04_EN.indd 17 2018-07-04 8:25:13
Loading ...
Loading ...
Loading ...