Loading ...
Loading ...
Loading ...
26 27
4. Quick cleaning
RoboVac will automatically stop cleaning after 30 minutes and return to the Charging
Base in this mode. If any small room or area needs to be cleaned, it is recommended
to select this mode to save time and power.
Press on the remote control to start quick cleaning mode.
5. Manual cleaning
You can direct RoboVac to clean a particular area by using the directional buttons on
the remote control.
Move backward
Turn left
Turn right
Move forward
Use the Boundary Strip
With the Boundary Strip, you can keep RoboVac away from any area or item you do
not want RoboVac to clean. RoboVac will recognize the Boundary Strip and will not
cross into the blocked-off area.
1. Identify the area or item you do not want RoboVac to get close to.
2. If necessary, use scissors to cut the Boundary Strip to a shorter length. Be sure to
correctly measure the length before cutting.
3. Apply the supplied strips of adhesive tape to lay the Boundary Strip flat on the
floor. Make sure the strip is placed FLAT on the floor or under an area rug.
1
2
• If the Boundary Strip is rolled up, remove and then re-apply on the floor
with adhesive tape. Otherwise the Boundary Strip may not work well.
• Make sure the Boundary Strip is placed on the same surface plane
RoboVac is used on.
• Be careful not to damage the floor when using adhesive tape. It is not
recommended for use on carpets.
• Keep the Boundary Strip away from objects that emit excessive heat.
Loading ...
Loading ...
Loading ...