Loading ...
Loading ...
Loading ...
24 25
Press on RoboVac or / on the remote control to start cleaning in Auto Mode.
- RoboVac will return to the Charging Base automatically when the battery
level becomes low or when RoboVac finishes cleaning.
- By default, RoboVac starts in Auto cleaning mode when it is turned on.
BoostIQ™ Feature
When the BoostIQ™ feature is enabled, RoboVac will automatically increase the
suction power if it detects stronger power is needed to ensure the best clean.
BoostIQ™ is ideal for cleaning thicker carpets and hard-to-sweep messes, which will
reduce the total cleaning time, but increase the noise level. If the vacuuming noise
caused by BoostIQ™ disturbs you, you can disable this feature. This feature only works
in Auto and Quick cleaning modes.
In Auto or Quick cleaning mode, press on the remote control repeatedly to adjust
the suction power level.
• The corresponding icon is displayed on the remote control.
Suction Power Level Beeps
Standard power
(Default)
BoostIQ™
(Automatically switches between Standard and Enhanced power)
Maximum power
When RoboVac starts cleaning in Auto or Quick mode the next time, it will
clean according to the suction power level you previously selected.
2. Spot cleaning
RoboVac intensively cleans a specific area in a spiral pattern, useful if there is a
concentrated area of dust or debris. In Spot mode, RoboVac will stop cleaning after 2
minutes.
Press on the remote control to start cleaning in Spot Mode.
3. Edge cleaning
RoboVac reduces its speed when it detects a wall and then follows the wall to ensure
the edge is cleaned thoroughly. In Edge mode, RoboVac will clean for 20 minutes and
return to the Charging Base.
Press on the remote control to start cleaning in Edge Mode.
Loading ...
Loading ...
Loading ...