Loading ...
Loading ...
Loading ...
Flight
Phantom 4 Pro / Pro+ Series User Manual
58
©
2020 DJI All Rights Reserved.
2. Abort landing process immediately by using the button on the screen.
3. a. When Landing Protection determines that the ground is suitable for landing, the Phantom 4 Pro
/ Pro+ will land gently.
b. If Landing Protection determines that the ground is not suitable for landing, the Phantom 4 Pro /
Pro+ will hover and wait for pilot conrmation.
c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when the
Phantom 4 Pro / Pro+ descends below 0.3 meters. Pull down on the throttle or use the auto landing
slider to land.
4. Aircraft will land and turn off automatically.
Stopping the Motors
There are two methods to stop the motors.
Method 1: When Phantom 4 Pro / Pro+ has landed, push the left stick down , then conduct the same
CSC that was used to start the motors, as described above . Motors will stop immediately. Release both
sticks once motors stop.
Method 2: When the aircraft has landed, push and hold the left stick down. The motors will stop after three
seconds.
OR
Method 1 Method 2
OR
Starting/Stopping the Motors
Starting the Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom
inner or outer corners to start the motors. Once the motors have started spinning, release both sticks
simultaneously.
Loading ...
Loading ...
Loading ...