Loading ...
Loading ...
Loading ...
– 6 –
Precautions for Use
As this section contains important safety-related information, be sure to read the following carefully
beforehand in order to use your projector correctly and safely.
During installation, keep the projector plug easily accessible so that the projector can be unplugged
immediately if necessary, or keep a circuit breaker within reach.
If the following situations occur, turn the power off, remove the power plug from the power outlet and
contact the Canon Customer Support Center. Failure to do so may result in fire or electric shock.
• If smoke is emitted
• If an unusual smell or noise is emitted
• If water or other liquid has entered the projector
• If metal or any other foreign material has entered the projector
• If the projector is knocked over or dropped and the cabinet is damaged
• If the projector is physically damaged through uses prohibited in this document, etc.
Take the following precautions when handling the power cord. Failure to do so may result in fire or electric
shock.
• Do not place any objects on the power cord and do not allow it to become trapped under the projector.
• Do not cover the power cord with a carpet.
• Do not modify or excessively bend, twist, pull, wind, or bundle the power cord.
• Keep the power cord away from heaters and other sources of heat.
• Do not use a damaged power cord. If the power cord is damaged, purchase a replacement from your
dealer.
• The power cord included with this projector is for use exclusively with this product. Do not use this cord
for other products.
Take the following precautions regarding the power supply, power plug, and connector. Failure to do so
may result in fire or electric shock.
• Do not use any power source with a voltage other than the voltage indicated (AC 100–240 V).
• Do not pull the power cord and be sure to hold the power plug or connector when removing. Incorrect
handling may damage the power cord.
• Do not insert any metal objects into the contact parts of the power plug or connector.
• Do not remove the power plug or connector with wet hands.
• Insert the power plug and connector securely up to the base. Additionally, do not use a damaged power
plug or an outlet that is loose.
• When using an extension cord, do not exceed the cord’s rated capacity.
• Periodically inspect the power plug and outlet and remove any dust or dirt from between the plug and
the outlet.
Installation and Handling Precautions
Take the following precautions regarding installation and handling of the projector. Failure to do so may
result in a fire, electric shock or personal injury.
• Do not use the projector where it might get wet, such as outdoors or by bathtubs or showers.
• Do not place containers containing liquid on top of the projector.
• Do not touch the projector itself, the power cord, or the cable if there is lightning outside.
• Do not move the projector until you have switched off the power, removed the power plug from the
power outlet and unplugged any other cables.
• Unplug the projector before cleaning or maintenance.
• Do not install the projector in a location that is damp or dusty, or where there is a lot of oily smoke or
steam. Oil can degrade the plastic, which could result in a ceiling-mounted projector falling from its
mounting.
• Do not remove the cabinet from the projector or disassemble it. The interior of the projector contains
high-voltage components as well as parts that are hot. If inspection, maintenance or repair is required,
contact the Canon Customer Support Center.
• Do not disassemble or modify the projector (including consumable parts) or the remote control.
Loading ...
Loading ...
Loading ...