Loading ...
Loading ...
Loading ...
– 45 –
Settings 2 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.
ITEM
DESCRIPTION
Auto Source
Press the cursor ◄► button to enter and enable or disable automatic source
detection.
Auto Power Off
Press the cursor ◄► button to enter and enable or disable automatic shutdown of
lamp when no signal.
The standby mode is started if there is no input signal and the selected time period
(minutes) has elapsed with no operation. This function is disabled if "0" is selected.
Direct Power On
Press the cursor ◄► button to enter and enable or disable a function to power on the
projector only by connecting the AC power cable.
Lamp Mode
Press the cursor ◄► button to enter and select the lamp mode for higher brightness
or lower brightness to save lamp life.
Reset All
Press (Enter) / ► to reset all settings to default values.
Reset All will not reset the following settings.
・Language
・Network
・Lamp Hour
Status
Press (Enter) / ►
to enter the Status menu. See page 46 for more information on
Status.
Advanced 1
Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
page 47.
Advanced 2
Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
page 59.
Note :
The lamp is automatically dimmed to 30% if the BLANK button is pressed or it is there is no input signal
for 30 seconds.
Loading ...
Loading ...
Loading ...