Loading ...
Loading ...
Loading ...
– 20 –
ITEM
LABEL
DESCRIPTION
SEE PAGE
11.
BLANK
Toggles the screen between blank and normal.
Also, toggles the built-in speaker between off and on.
12.
HDMI
Toggles the input sources for display between HDMI sources.
13.
VIDEO
Toggles the input sources for display between Video and S-Video.
14.
MUTE
Toggles the built-in speaker between off and on.
15.
VOLUME
Displays the volume setting bar.
28
16.
KEYSTONE
Displays the keystone setting bar.
27
17.
STATUS
Opens the OSD Status menu. (the menu only opens when
an input device is detected)
46
18.
3D
Opens the 3D function OSD.
19.
ZOOM
Displays the zoom setting bar.
20.
FREEZE
Freeze/unfreezes the on-screen picture.
21.
BRIGHTNESS
Displays the brightness setting bar.
22.
LAMP
Displays the lamp mode selection.
23.
MENU
Opens and exits OSD menus.
29
24.
AUTO
Auto adjustment for frequency, phase, position.
25.
Navigates and changes settings in the OSD.
Keystone correction.
Remote Control Operating Range
The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of
the projector to operate it. Remote control range is up to approximately 5 m (16') . Use the remote
control within an angle approximately 15° in any direction from directly in front of the infrared remote
receiver. But the effective control range may be reduced.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are
limited in use.
Loading ...
Loading ...
Loading ...