Loading ...
Loading ...
Loading ...
– 56 –
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by
TELNET” for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
1. Check and get the IP-Address on OSD of the projector.
2. Make sure that laptop/PC can access the web-page of the projector.
3. Have the TELNET function enabled.
See How to have TELNET enabled in Windows 7 / 8 / 10 on page 57.
4. Start => All Programs => Accessories => Command Prompt
5. Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key
pressed, the RS232 command will be workable.
Loading ...
Loading ...
Loading ...