SBC 15 User Manual

Loading ...

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacture’s declaration – electromagnetic immunity

The SBC 15 is intended for use in the electromagnetic environment speciﬁed below. The customer or the user of the SBC 15 should assure that it is

used in such an environment.

Immunity test IEC 60601

test level

Compliance

level

Electromagnetic environment – guidance

Radiated RF

IEC 61000-4-3

3 V/m

80 MHz to

2.5 GHz

3 V/m

Portable and mobile RF communications equipment should be used no closer to any part of the SBC

15, including cables, than the recommended separation distance calculated from the equation applica

ble to the frequency of the transmitter.

Recommended separation distance:

d = 1.2

80 MHz to 800 MHz

d = 2.3

800 MHz to 2.5 GHz

Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter

manufacturer and d is the recommended separation distance in meters (m).

Field strengths from ﬁxed RF transmitters, as determined by an electromagnetic site survey,

should be

less than the compliance level in each frequency range.

Interference may occur in the vicinity of equipment marked with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is aected by absorption and reﬂection from structures,

objects and people.

Field strengths from ﬁxed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM

and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to

ﬁxed RF transmitters, an electromagnetic site survey should be considered. If the measured ﬁeld strength

in the location in which the SBC 15 is used

exceeds the applicable RF compliance level above, the SBC 15 should be observed to verify normal operation. If abnormal performance is observed,

additional measures may be necessary, such as re-orienting or relocating the SBC 15.

Over the frequency range 150 kHz to 80 MHz, ﬁeld strengths should be less than 3 V/m.

Loading ...

User Manual - Page 61