Loading ...
Loading ...
Loading ...
Electromagnetic Compatibility Information
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture’s declaration – electromagnetic emission
The SBC 15 is intended for use in the electromagnetic environment specified below.
The customer or the user of the SBC 15 should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 2 The SBC 15 must emit electromagnetic energy in order to perform its intended function.
Nearby electronic equipment may be aected.
RF emissions CISPR 11 Class B
The SBC 15 is suitable for use in all establishments other than domestic and those directly
connected to the public low-voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Not applicable
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacture’s declaration – electromagnetic immunity
The SBC 15 is intended for use in the electromagnetic environment specified below. The customer or the user of the SBC 15 should assure that it is
used in such an environment.
Immunity test IEC 60601 test
level
Compliance
level
Electromagnetic environment – guidance
Electrostatic discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood, concrete or ceramic tile. If floors are covered with syn
-
thetic material, the relative humidity should be at least 30 %.
Power frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
3 A/m 3 A/m
Power frequency magnetic fields should be at levels characteristic of a typical
location in a typical commercial or hospital environment.
60
Loading ...
Loading ...
Loading ...