Loading ...
Loading ...
Loading ...
Average values
•
Press the memory button M.
AM
flashes on the display.
The average value of the morning
measurements for the last 7 days is
displayed (morning: 5.00 a.m. – 9.00
a.m.).
•
Press the memory button M.
PM
flashes on the display.
The average value of the evening
measurements for the last 7 days is
displayed (evening: 6.00 p.m. – 8.00
p.m.).
Individual measured values
•
When you press the memory but-
ton M again, the last individual
measurement is displayed (in this
example, measurement 03).
•
When the memory button M is pressed again, you can
view your individual measurements.
•
To switch the device o again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button .
Delete the measured values
•
To clear the memory of the relevant user memory, you
must first select a user memory.
•
Start the retrieval of the average measured values. A
flashes on the display and the average value of all saved
measured values in this user memory is displayed.
•
Press and hold the memory button M and the START/
STOP button for 5 seconds, depending on the user
memory you are in.
Delete the measured values
All values of the current user memory
are deleted and the device switches
o.
7. Error messages/troubleshooting
In the event of errors, the error message _ appears on the
display.
Error messages may appear if
• the systolic or diastolic pressure could not be measured (
or
appears on the display)
22
Loading ...
Loading ...
Loading ...