Loading ...
Loading ...
Loading ...
Frequently asked questions
72
Message Possible cause and solution
Intake fault, Boiler
Switch Off/On
There is a fault with the steam system.
Press the button to switch the steam ironing
system off and then back on again.
After the cool-down phase, the steam ironing system
carries out a rinse function and attempts to correct
the fault itself. The cool-down phase can take up to
3hours.
Remove the residual water container if you are
prompted to do so by the appropriate message in
the display.
Empty and dry the residual water container.
Push the residual water container back in the
tower until it clicks into place.
There is a fault with the steam ironing system.
If the fault message continues to be displayed,
contact Miele Service.
Pressure switch
fault. Switch Off/On
There is a fault with the steam system.
Press the button to switch the steam ironing
system off and then back on again.
If the fault continues to be displayed, contact
Miele Service.
Boiler fault, warm
Switch Off/On
There is a fault with the steam ironing system.
Press the button to switch the steam ironing
system off and then back on again.
If the fault continues to be displayed, contact
Miele Service.
The steam generator is contaminated with water con-
taining too much limescale or salt.
Start a descaling process (see "Starting the
descaling process early"). To avoid this problem in
the future, the preset water hardness level can be
set one level higher (e.g., from Level 4 to Level 5,
see "Water hardness setting").
If the fault continues to be displayed, contact
Miele Service.
Loading ...
Loading ...
Loading ...