Loading ...
Loading ...
Loading ...
Cleaning and care
49
Descaling warning
Descale soon will appear in the dis-
play the next time you switch the steam
ironing system on if there are only about
2hours of ironing available before the
system needs descaling.
You can start the descaling process
whilst the system is cold via the set-
tings menu (see "Starting the descaling
process early") or you can press the
OKbutton to confirm the message in
the display and continue ironing as nor-
mal. The symbol will continue to
show in the display until descaling is
carried out.
After the remaining operating hours
have elapsed, the descaling process
must be carried out before the steam
ironing system can be used again.
The time to start the descaling
process can be set individually at any
time and started as required (see
"Starting the descaling process
early").
You can interrupt the descaling process
by switching the steam ironing system
off with the button. When you turn
the system back on, descaling will start
again from the point where the process
was interrupted.
The messages in the display will guide
you through the descaling process. The
entire descaling process takes approx.
90minutes.
Only proceed with the required action if
you are prompted to do so by the ap-
propriate message in the display. Once
the descaling process has started, your
presence is required after around
20minutes and again after a further
60minutes. For the rest of the descaling
process, you can leave the steam iron-
ing system unattended.
Tip: To optimize the descaling process,
start the procedure while the system is
still cold after switching the steam iron-
ing system on. This way, you avoid a
delay of up to 3hours that may be
caused by the cool-down phase.
Loading ...
Loading ...
Loading ...