Loading ...
Loading ...
Loading ...
Frequently asked questions
66
Problem solving guide
Problem Possible cause and solution
The steam ironing sys-
tem cannot be switched
on.
The appliance does not have any power.
Check whether
– the plug is inserted into the wall socket.
– the fuse in your fuse panel is OK.
After a power outage,
the steam ironing sys-
tem does not work any-
more.
The steam ironing system is switched off
Use the button on the control panel to switch
the steam ironing system on.
If a power outage occurred during the automatic
rinse, the process will be repeated when the appli-
ance is switched on again.
If the power outage occurred during descaling, the
process will be resumed from the stage at which it
was interrupted when the appliance is switched on
again.
The height of the iron-
ing board cannot be ad-
justed.
The ironing board is not locked into place on both
sides of the tower.
Use both hands to pull the ironing board up and
into the horizontal position until the locking mech-
anism audibly clicks into place on both sides of
the tower (see "Assembly").
The steam ironing sys-
tem cannot be disman-
tled.
The appliance is not in its lowest working position.
Adjust the appliance to its lowest working height
(see "Dismantling").
The residual water container is not inserted com-
pletely and is not locked in place.
Push the residual water container back into the
tower until the container locks into place.
Then adjust the steam ironing system to its lowest
working height (see "Dismantling").
Loading ...
Loading ...
Loading ...