Loading ...
Loading ...
Loading ...
Configuring the detection time
You
can specify how long the sound sensor
continually detects sound before the camera
unit automatically plays a lullaby.
1 MMENUN
2 MbN: “Auto Lullaby” a MOKN
3 MbN: “Detection Time”
*1
a MOKN
4 MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for “Sound List”
(page 26).
Configuring the play time
You
can specify how long the camera unit
plays lullabies when sound is detected.
1 MMENUN
2 MbN: “Auto Lullaby” a MOKN
3 MbN: “Play Time”
*1
a MOKN
4 MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
*1 This feature can only be selected when a
lullaby is selected for “Sound List”
(page 26).
Sensors
You
can configure the sensors to match how
you want the motion and sound to be
detected. The sensor configurations will also
affect how the auto lullaby and smart
notification features operate.
Configuring the motion sensor
You
can specify the sensitivity of the motion
sensor, and also which areas of images are
used to detect motion.
Configuring the motion sensor
sen
sitivity
Motion sensor sensitivity is configured using a
combination of the following.
– the distance from the camera unit to your
bab
y
– the age of your baby in months
Change the settings in accordance with the
growth of your baby.
1 MMENUN
2 MbN: “Sensor Settings” a MOKN
3 MbN: “Motion Sensor” a MOKN
4 MbN: “Sensitivity” a MOKN
R A message is displayed. Press MOKN
to continue.
5 MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
Configuring the motion sensor
det
ection area
1 MMENUN
2 MbN: “Sensor Settings” a MOKN
3 MbN: “Motion Sensor” a MOKN
4 MbN: “Set Detection Area” a MOKN
R An operation guide is displayed. Press
MOKN to continue.
5 Press MCN, MDN, MFN, or MEN to select a
cell to disable detection for. a MOKN
R Repeat for each cell to be disabled.
R To enable detection for a disabled cell,
select the disabled cell. a MOKN
6 When finished, press M
N a MM
ENUN
r
e
peatedly to exit.
Configuring the sound sensor
You
can specify the sensitivity of the sound
sensor.
1 MMENUN
2 MbN: “Sensor Settings” a MOKN
3 MbN: “Sound Sensitivity” a MOKN
4 MbN: Select the desired setting. a MOKN
a MMENUN repeatedly to exit.
For assistance, please visit http://shop.panasonic.com/support
27
Programming
HN3001_(en_en)_0110_ver.410.pdf 27 2018/01/10 11:43:22
Loading ...
Loading ...
Loading ...