Loading ...
Loading ...
Loading ...
6
The mains lead on this equipment is supplied with
a moulded plug incorporating a fuse, the value of
which is indicated on the pin face of the plug.
Should the fuse need to be replaced, an ASTA or
BSI approved BS 1362 fuse must be used of the
same rating. If the fuse cover is detachable never
use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is
of the same colour as that visible on the pin face
of the plug. Fuse covers are available from your
dealer.
DO NOT cut off the mains plug from this
equipment. If the plug fitted is not suitable for
the power points in your home or the cable is too
short to reach a power point, then obtain an
appropriate safety approved extension lead or
consult your dealer.
If there is no alternative to cutting off the mains
plug, ensure that you dis pose of it immediately,
having first removed the fuse, to avoid a possible
shock hazard by inadvertent connection to the
mains supply.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue= Neutral, Brown=Live
As these colours may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire coloured BLUE must be connected to
the terminal marked with the letter N or coloured
BLUE or BLACK.
The wire coloured BROWN must be connected
to the terminal marked with the letter L or coloured
BROWN or RED. On no account connect either
of these wires to the terminal marked E or by the
earth symbol
or coloured green or green and
yellow.
Important for United Kingdom (for DZ-MV230E(UK)/DZ-MV200E(UK))
Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft
Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
company.
DZ-MV238/208E(AU)P1-10 02.4.25, 5:17 PM6
Loading ...
Loading ...
Loading ...