Loading ...
Loading ...
Loading ...
English - 57
TROUBLESHOOTING
OPTIMUM OPERATING ENVIRONMENT FOR SPARKLING WATER
Item Descriptions
[Water temperature]
“We recommend
that you only drink
sparkling water after it is
sufficiently cooled.”
• Since the temperature of the sparkling water greatly affects the taste
of the water, if the temperature of water is not sufficiently low, you may
not be able to get the right taste.
• We recommend you wait at least four hours after connecting tap water
to the refrigerator before making and dispensing sparkling water.
• We also recommend that when the refrigerator is producing sparkling
water, that you dispense as little regular water as possible so that the
sparkling water is produced with cold water.
• If you drink 0.5 gallons (2 liters) or more a day, the water may not be
cooled sufficiently.
• To store dispensed sparkling water, put the water in an air tight
container and keep it in a cold section of the refrigerator for better
taste.
[CO
2
concentration of
sparkling water 1]
“To ensure a precise CO
2
concentration, dispense
all the remaining
sparkling water before
producing additional
sparkling water.”
• Because the current system does not measure the CO
2
concentration
of the sparkling water remaining in the sparkling water tank before it
starts to produce additional sparkling water, the resulting concentration
may differ from the desired level, depending on the remaining sparkling
water in the sparkling water tank.
• If you haven't used the sparkling water function for an extended period
of time (one week or longer), first remove all the sparkling from the
sparkling water tank, and then produce fresh sparkling water for better
quality and taste.
[CO
2
concentration of
sparkling water 2]
“To maintain a precise
CO
2
concentration of
sparkling water, replace
the CO
2
cylinder before
it is depleted.”
• As the time to replace the SodaStream Carbonator comes closer, the
CO
2
concentration decreases and sparkling water becomes weaker.
• If the SodaStream Carbonator runs out of CO
2
, the cylinder icon ( )
turns on. If this occurs, replace the SodaStream 60L Carbonator with a
new one.
[Preparing sparkling
water – Capacity]
“If you want to have
sufficient sparkling water
prepared in the morning,
we recommend that
you touch and hold the
Sparkling Maker button
for 3 seconds to start
the sparkling water
production before going
to bed."
• If you do not press and hold the “Sparkling Maker” button for
3seconds to start the sparkling water production, the amount of
sparkling water in the water tank may be less than the maximum
production capacity of 1.1 liters.
• Since a production time of 10~30min is required if you need 1.1
liters or more of sparkling water, we recommend producing and
storing enough sparkling water in advance or at least securing the
maximum sparkling water capacity of 1.1 liter by pressing and holding
the “Sparkling Maker” button for 3 seconds to start sparkling water
production.
DA68-03013A-18.indb 57 2018. 7. 9. �� 4:40
Loading ...
Loading ...
Loading ...