Loading ...
Loading ...
Loading ...
English - 16
6. Attach the front of the Top Cover, and then
press down on its back until it lies flat. Re-
attach the screws.
6-1. When attaching the Top Cover, open the right
door to prevent interference between Bracket
(G) and the Top Cover. (Optional)
G
• Assemble the Fridge and Freezer doors
in the reverse order of disassembly.
• If the Wire Connectors are cross-assembled,
the display will not work properly.
Center of the
Indicator Line
H
6-2. Insert Pusher (J) in the arrow direction to
attach. (Optional)
J
• Make sure Pusher (J) does not protrude.
CAUTION
CAUTION
LEVELING THE REFRIGERATOR
AND ADJUSTING THE DOOR
HEIGHT AND THE GAP BETWEEN
THE DOORS
HOW TO LEVEL THE REFRIGERATOR
If the Refrigerator is not level, it can cause one
Fridge door to be lower than the other.
• Insert a Flat-Head (-) Screwdriver into the slot in
the Leveling Leg Control Lever and adjust the
level by turning the Control Lever clockwise or
counter-clockwise. When you rotate the Lever
clockwise, you raise the refrigerator. When you
rotate the Lever counter-clockwise, you lower
the refrigerator.
flat-blade
screwdriver(-)
Control Lever
• If the Refrigerator is not level back and
front, put a solid panel (such as a plastic
panel, a plastic ruler, etc.) on the floor
where the rear legs will rest, and then fix
it in place with plastic tape. When you
push in the Refrigerator, make sure the
rear legs rest on the panel.
• If you have a wooden floor or similar soft floor,
take care not to damage the floor when pushing
the Refrigerator into place.
DA68-03013A-18.indb 16 2018. 7. 9. �� 4:39
Loading ...
Loading ...
Loading ...