Loading ...
Loading ...
Loading ...
English - 55
TROUBLESHOOTING
The sparkling
water dispenses at
a slower rate than
regular water.
• Check if the tap water valve is closed or the hose is bent and if water
is being supplied to your home at the normal pressure. If the tap water
pressure is too low, the sparkling water maker may not work properly
because too little water is being supplied to the sparkling water tank.
• When water is supplied to the sparkling water tank from a water purifier,
sparkling water may not be produced properly because too much water
is required over a short period of time. We recommend that you do not
dispense water from a water purifier less than five minutes before you start
a sparkling water production cycle.
• If this problem continues, please contact the water purifier manufacturer
or ask a plumber to increase the tap water pressure to a normal level.
The sparkling
water is not cold
enough and tastes
flat.
• If you continuously produce a lot of sparkling water, you may not be able
to enjoy the true taste of sparkling water because there is too little time to
cool the water. To drink sparkling water at its optimal state, you have to
ensure sufficient cooling time before you dispense sparkling water.
• We recommend you wait at least four hours after connecting tap water to
the refrigerator before making and dispensing sparkling water.
The sparkling
“OFF” icon is
displayed, but the
sparkling water
maker is not turned
off.
• Check if the short lines inside the cup icon are turning on one by one in a
clockwise direction. This indicates that sparkling water is being produced
and cannot be stopped immediately. However, if you press and hold
the “Sparkling Maker” button for 3 seconds during production, then the
“OFF” icon is displayed over the cup icon and automatic sparkling water
production will turn off after the current production cycle is complete.
The concentration
control function
is disabled during
sparkling water
production.
• Check if the short lines inside the cup icon are turning on one by one
in a clockwise direction. This indicates that the sparkling water is being
produced. Since the sparkling water concentration cannot be changed
during a production operation, change the concentration level when
production is complete and the blinking stops. The refrigerator applies the
new Sparkling Level to the next production operation.
Sparkling water
is produced
continuously.
• Has the sparkling water production time limit been reached?
The length of time during which sparkling water is generated is determined
by the Sparkling Level setting. (Level 1: Approx. 10 mins; Level 2: Approx.
20 mins; Level 3: Approx. 30 mins)
Please wait until the sparkling water production time has been reached.
• Check if the refrigerator door is open.
If the refrigerator door is open, the sparkling water maker stops to prevent
noise that is generated by the sparkling water production.
If you open the door frequently, the time during which sparkling water is
produced may be extended depending on the Sparkling Level setting.
Close the refrigerator door and wait until the sparkling water production
time limit has been reached.
The cylinder
icon did not
turn on when
the SodaStream
Carbonator was
removed.
• If you remove a SodaStream Carbonator that has a little gas remaining,
the cylinder icon on the display may turn on after a several seconds.
• If you remove a SodaStream Carbonator that has gas remaining, the
cylinder icon on the display may not turn on for a period of time.
DA68-03013A-18.indb 55 2018. 7. 9. �� 4:40
Loading ...
Loading ...
Loading ...