Loading ...
Loading ...
Loading ...
Please note
•
When using a mop, clean using straight lines and
diagonal lines.
•
Wet the mop and squeeze it sufficiently to remove
any residual water before attaching the mop.
Attaching and using a mop pad in a dry state may
compromise the cleaning performance.
•
When filling the water tank with water, do not fill the
water more than the MAX line.
•
Do not separate the cap of the water tank completely.
•
Open only one cap of the water tank to fill the water.
•
When cleaning is completed, always empty the water
in the water tank.
Otherwise the water may be contaminated and give
off a bad smell.
Shake the water tank to remove the remaining water.
•
Open the 2 caps on the side of the water tank and dry
for over 24 hours in a well-ventilated location with no
direct sunlight.
•
When cleaning with the mop is finished, separate and
wash the mop pads.
Otherwise the mop pads may give off a bad smell.
•
Do not clean while a soiled mop pad is installed.
Cleaning will not be effective.
•
From new, the Water Adjustment button is set to
Level 1.
Press the button according to the amount of water
needed.
•
When moving around with the mop nozzle, set the
Water Adjustment button to STOP.
•
If there are foreign objects stuck in the mop
attachment plate's rotating mechanism or a strong
force or impact is applied to it, the mop attachment
plate will stop automatically to protect the product.
Press the Power button again to use the product
because it is not a failure. Clean any foreign matter
from the plate before turning it back on again.
•
When you replace the mop nozzle during product
operation, the product will operate in mopping only
mode with suction OFF.
•
If you use mop cleaning with suction OFF for a long
period of time, the safety device (motor overheating
prevention device) will operate, stopping product
operation, in order to protect the mop nozzle.
(Recommended duration of use: 80 minutes) It is not
a sign of malfunction. Use the product after allowing
the mop nozzle to cool for 1 hour.
23
Loading ...
Loading ...
Loading ...