Loading ...
Loading ...
Loading ...
flexible Hose Extension
Since its length can be adjusted, it is connected with the
inlet port and used to clean out of reach places.
* The flexible hose extension is provided only for an
applicable model.
Please note
•
When the flexible hose extension is used, the Multi-
surface Power Drive Nozzle®, Hard Floor Power Drive
Nozzle® and the Bedding Power Punch do not work.
•
Attach the Multi-surface Power Drive Nozzle®, Hard
Floor Power Drive Nozzle® or the Bedding Power
Punch to the body or the extension pipe when using it.
• Press the “+” button if you wish to carry out both
dust cleaning and mop cleaning at the same time in
Mopping only mode.
• Press the “-” button in Normal mode if you wish to
use the Mopping only mode.
Please note
The mop pads will only rotate at one speed regardless of
what power setting the Vacuum is set to.
For mop cleaning
How to fill the water
1
Press the PUSH button to separate the mop nozzle
and the water tank.
2
Open the cap on the side of the water tank.
•
Open one cap only. Opening both caps may cause
the water to flush.
3
Fill the water to the MAX line and close the cap tightly.
(Using the water filler jug will make the filling of water
easier.)
•
If the water tank is filled with water and stored, water
may slowly drip from the water tank and on to the air
intake. When not using the mop nozzle, ensure that
the water tank is empty empty.
•
If you do not close the cap on the side of the water
tank, water may leak.
Good) Bad)
4
Assemble the mop nozzle and the water tank.
Insert the 2 bumps in front of the tank and push
until a clicking sound is heard.
Click
How to install the mop
1
Wet the mop pad with water before use.
2
Squeeze the mop pad sufficiently to remove liquid.
21
Mop Nozzle
When you attach the mop nozzle, the product will
operate initially in Mopping only mode with suction OFF.
Loading ...
Loading ...
Loading ...