Loading ...
Loading ...
Loading ...
15
CAUTION
•
Avoid dropping the product and parts when taking them
out of the package. It may damage the product and/or
cause personal injury.
•
Do not use double-sided tape to anchor the charging
station on papered walls. Please use the provided screws
as otherwise the wall paper will get torn by movement
of the charging station during the docking of the unit.
•
We recommend anchoring the station with the
anchoring screw.
•
Use the anchoring screws only when the wall is made
of concrete or is solid enough. An unsuitable wall
can cause the mountings to weaken and cause the
Charging station to fall causing injury and damage the
property or product.
•
Do not store the product or battery in the accessory
bag except for the inlet ports and flexible hose
extension.
•
Be careful not to throw or drop the accessory bag
carrying accessories such as the inlet ports. It may
damage the product and/or cause personal injury.
* The accessory bag is provided only for an applicable
model.
Please note
•
The charging station, its pipe and support cannot
be disassembled separately once they have been
assembled, and the charging station has been
attached to the wall.
•
If necessary, the charging station and the nozzle
cradle can be separated from the charging station
pipe. Pull the charging station upward and separate it
in sequence while the charging station support is in a
fixed state.
Installing the wall-mount station
1
Connect the power adapter to the port on the back
of the charging station and plug the power cord
into the power outlet.
2
Ensure that there are no Electrical wires or water
pipes inside the wall where the wall mount bracket
will be attached to. By drilling or screwing, make a
hole 1 meter from the floor to insert the wall plug
or screw anchor.
•
Recommended diameter of hole:
Φ
6.5;
Recommended depth: 60 mm.
3
Anchor the station to the wall with the provided
anchoring screws.
1
Wall anchoring
hole
Anchoring
screw for wall-
mount type
Screw
anchor
Please note
•
A service request to change the installation location
of the charging station will incur additional costs if
required to do so by a qualified installer.
•
The Detachable stand for the nozzles and the
Detachable stand for mop pads cannot be separated
once they are assembled.
Uninstalling the station
Keep and charge the product on the charging station
after separating extension pipe and nozzle from the
product body.
CAUTION
•
Leaving the extension pipe and nozzle assembled for a
long time may cause damage the product.
Loading ...
Loading ...
Loading ...