2019 CHASSIS CAB User Manual

Loading ...

286 STARTING AND OPERATING

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has reached the

desired speed, push the SET (-) button and release. Release

the accelerator and the vehicle will operate at the selected

speed.

NOTE:

The vehicle should be traveling at a steady speed and on

level ground before pushing the SET (-) button.

To Vary The Speed Setting

To Increase Speed

When the Speed Control is set, you can increase speed by

pushing the RES (+) button.

The driver’s preferred units can be selected through the

instrument panel settings if equipped. Refer to “Getting To

Know Your Instrument Panel” for more information. The

speed decrement shown is dependant on the chosen speed

unit of U.S. (mph) or Metric (km/h):

U.S. Speed (mph)

• Pushing the RES (+) button once will result in a 1 mph

increase in set speed. Each subsequent tap of the button

results in an increase of 1 mph.

• If the button is continually pushed, the set speed will

continue to increase until the button is released, then the

new set speed will be established.

Metric Speed (km/h)

• Pushing the RES (+) button once will result in a 1 km/h

increase in set speed. Each subsequent tap of the button

results in an increase of 1 km/h.

• If the button is continually pushed, the set speed will

continue to increase until the button is released, then the

new set speed will be established.

To Decrease Speed

When the Speed Control is set, you can decrease speed by